(주)대성윈텍 홈페이지 입니다.
재료시험기
물리·과학기기
환경관련기기
전기전자계측기
전기전자계측기
현재위치 : > 제품소개 > 전기전자계측기
멀티메타
클램프메타
접지저항계
전력분석계
기록계
캘리브레이터
저저항계
LCR메타
밧데리테스터
누설전류계
절연저항계
상테스터
검전기
정전용량측정기
멀티메타 클램프메타 접지저항계 전력분석계
기록계 캘리브레이터 저저항계 LCR메타
밧데리테스터 누설전류계 절연저항계 상테스터
검전기 정전용량측정기
   93 개의 상품이 준비되어 있습니다. 이름순 | 모델순 | 브랜드순 | 인기순

<img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/ETC/blank.jpg\" border=\"0\">
<img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/TES/PROVA-11.jpg\" border=\"0\">
<img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/ETC/copyright.jpg\" border=\"0\">
<img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/ETC/company_introduction.jpg\" border=\"0\"> <img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/ETC/blank.jpg\" border=\"0\">
<img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/TES/TES-1500.jpg\" border=\"0\">
<img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/ETC/copyright.jpg\" border=\"0\">
<img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/ETC/company_introduction.jpg\" border=\"0\"> <img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/ETC/blank.jpg\" border=\"0\">
<img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/TES/TES-3660.jpg\" border=\"0\">
<img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/ETC/copyright.jpg\" border=\"0\">
<img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/ETC/company_introduction.jpg\" border=\"0\">
누설전류계 PROVA-11 정전용량측정기 TES-1500 절연저항계 TES-3660 와트클램프메타 PROVA-6605
멀티메타 DT-10 클램프메타 (AC 1000A) DT-3340 mA/V Calibrator DT-925 휴대용 오실로스코프+멀티메타
LA-1010 3 in 1 Stud/Metal/AC Voltage Finder

Features:

1.        Non-Contact Detection of AC Voltage from 200VAC to 1000VAC

2.        100VAC to 1000VAC (European standard)

3.        Rugged, double molded case

4.        Suitable for outlets or against wire insulation testing

5.        Flashing red LED light indicator

6.        Built-in bright fl ashlight with ON/OFF button

7.        Convenient size with pocket clip

8.        For use on 50/60Hz circuits

9.        Blue light means you’re close(AC-10)

10.    Red LED light and audible beeper indicator(AC-9B/AC-10)

11.    Motor Shaking and LED light (AC-9C)

12.    NCV, wide range and high sensitivity from 12V to 1000V

Test magnet field (H) : 63,98,401,810

 

APPLICATIONS GENERAL

1. Testing operating solenoid valves in pneumatic and hydraulic control equipment

2. Testing relays with coils and electrically controlled solenoid valves in all types of vehicles and machineries

3. Testing solenoid valves when servicing oil burners, the test lamp lights immediately and without metallic contact where there is a magnetic field, e.g. an activated coil in a solenoid valve. The test lamp responds to all kind of magnetic fields –from alternating current to direct current and to permanent magnets.

 

Size(HxWxD): 158mm x 21mm x 25mm (AC-8M)

Weight: 34g

Principle of measurement by “fault loop” for installations with neutral as per diagram indication

Earth loop measurement current less than the drop-out threshold of the 30mA circuit breakers

Measurement of the earth resistance by 3 1/2 digit display from 0 to 1999Ω (resolution 1Ω measurement updated every 1.5s)
3 in 1 Stud/Metal/AC Voltage Finder LA-1010 Non-Contact AC Voltage Detectors AC-9B Magnet Space Testers AC-8M Earth and Continuity Tester DT-9052
The new ergonomic, easy to use socket tester is designed to make the electrician’s job easier and is ideal for first level indication for testing standard mains sockets

The Phase Rotation Indicator is a handheld instrument designed to detect the rotary field of three-phase systems.

1. 3 Phase indication

2. Indication of phase rotation

3. Clear LCD display

4. No battery required

Features:

1.      Wide range measurements from 500V to 5000V and up to 60GΩ.

2.      Large 6000 counts digital display with bargraph and backlight.

3.      Polarization index measurement (PI).

4.      Auto ranging & Timer measurement function.

5.      Indication of output voltage and discharge voltage.

6.      Auto-discharge function and voltage output warning function.

7.      Auto power off and battery check.

8.      MAX/MIN, PEAK, Relative value & Data hold functions for DC/AC voltage measurements.

9.      Safety standard IEC61010-1 CAT IV 600V.

 

Electrical Digital Earth Resistance Tester is direct replacement of the conventional hand generator type tester. It is designed for measurement of the resistance of earthing used in the electrical equipment as well as for measurement of ground resistibility. It can be used for measurements of the other low regular and liquid resistances. It can also be used for measurement of voltage AC, voltage DC and resistance.

This instrument finds wide application for testing earthing installation in power based industries, telecommunication networks and electrical traction systems etc.
Socket Polarity Tester DT-905A Phase Rotation indicator DT-901 High Voltage Insulation Tester DT-6605 Earth Ground Resistance Testers DT-5300
CP-12/CP-1000 AC/DC Clamp-on Adaptors

The CP-12/1000 are compatible with any Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device.

CP-12 AC Clamp-on Adaptor provides non-invasive Current measurements to 10A with resolution to 10mA for AC Current. 

CP-1000 is an AC/DC Clamp-on Adaptor.

1.  Shielded transformer jaw opens to 1.2˝

2.  100µA high resolution

3.  Least affected by external magnetic fi eld, providing wide measuring range from very small 

to large current

4.  Designed to safety standard IEC 61010-2-032: over-voltage CAT.III, 300V and pollution 

degree 2.

5.  Data hold function to allow for easy reading in dimly lit or hard-to-reach locations

6.  Dynamic range of 2000 counts full scale

7.  Auto power off

DT-9809 AC Leakage Current Tester

AC leakage current tester 9809 is a multifunction clamp meter with very good resolution of 10uA. It is very useful for power system check and installation. With the measuring range up to 100A, this tester is great for appliance installation or for car applications.

DT-3353 True RMS 1000A AC Watt Clamp Meter

3353 Professional True RMS 1000A AC Watt Clamp Meter provides accurate Watt, AC Current and Voltage readings regardless of waveforms.
AC/DC Clamp-on Adaptors CP-12/CP-1000 Mini AC Leakage Current Tester DT-9810 AC Leakage Current Tester DT-9809 True RMS 1000A AC Watt Clamp Meter DT-3353
DT-330/332  Mini AC, AC/DC Autoranging Clamp Meters

The 330 series are designed to verify the presence of load current, voltage and resistance, etc. The small bodies and jaws fi t perfectly in your hand and a large backlit display is easy to read.

Data Hold freeze the displayed value

Auto Power Off

DT-360/363 Compact AC, AC/DC Autoranging Clamp Meters

The 360 series clamp meters offer all the features you need to fi t the way you work. The small bodies and jaws fit perfectly in your hand and into tight places. Meter controls are positioned so that current measurements can be done with one hand. A large backlit display is easy to see and a handy Display Hold keeps measurements on the display.  Measuring starting current for motors, lighting, etc. is easy with the inrush current function (366 only).

Double molded plastic housing

Auto Power Off

DT-355/356  Professional AC, AC/DC True RMS Autoranging Clamp Meters

The 355 series clamp meters offer all the features you need to fi t the way you work. The small bodies and jaws fi t perfectly in your hand and into tight places. Meter controls are positioned so that current measurements can be done with one hand. A large backlit display (on most models) is easy to see and a handy Display Hold keeps measurements on the display.

Double molded plastic housing

True RMS measurement for ACV & ACA 

Auto Power Off

DT-350/351 Compact AC, AC/DC Autoranging Clamp Meters

The 350 series clamp meters offer all the features you need to fit the way you work. The small bodies and jaws fit perfectly in your hand and into tight places. Meter controls are positioned so that cur-rent measurements can be done with one hand. A large backlit display (on most models) is easy to see and a handy Display Hold keeps measurements on the display. Measuring starting current for motors, lighting, etc. It is easy with the inrush current function (on most models).

Double molded plastic housing

Auto Power Off
Mini AC, AC/DC Autoranging Clamp Meters DT-330/332 AC, AC/DC Autoranging Clamp Meters DT-360/363 AC, AC/DC True RMS Autoranging Clamp Meters DT-355/356 Compact AC, AC/DC Autoranging Clamp Meters DT-350/351
DT-3360/3363/3367 1000A AC, AC/DC Clamp Meters

3360/3363/3367 series professional 1000A AC, AC/DC clamp meters provide multi-function for 1000A AC, AC/DC, voltage, resistance, capacitance, Frequency, Temperature, duty cycle and  continuity. These series are with 6000 counts digital LCD display and analog bargraph.

6000 counts digital LCD display 

Analog Bargraph/Segments

Electronic overload protection

Continuity buzzer & diode check

Data Hold function

DCA Zero function

Max/Min function

Low battery indication

Auto Power Off

True RMS measurement (3367)

DT-9935 Professional LCR Meter

9935 LCR Meter features with an innovative automatic selection technology, automatically measuring L,C and R with Q, D and θ by just turn on the meter.The testing frequency is up to 10KHz and it can output up to 100KHz test frequency. It provides high accuracy with four or fi ve terminal Kelvin measurements.

1.  Overload Indication

2.  Lower Battery Indication

3.  Auto Power Off

Features:

Sampling rate
 5times/sec
 
Overload Indication
 \"OL\" or \"-OL\"
 
Auto Power Off
 10 minutes
 
Operating Temp
 0~50ºC, <=80%R.H.
 
Storage Temp
 -20~60ºC
 
Temp. coeffi cient
 0.15(Spec.Acc)/ºC, <18ºC or>28ºC
 
Safety
 Comply with IEC61000 EMC standard
 
Power Requirement
 AA size 1.5V X 4 batteries(NEDA 15A or IEC LR6)
 
Battery Life
 30 hours (Alkaline battery)
 


- 보기편한 LCD 스크린(10 Display 4 digit LCD)
- Connectors for 4 Current Sensing Clamps
- 1P2W, 1P3W, 3P3W2M, 3P4W Power 측정
- True RMS 기능
- Power: KW, KVAR, KVA, PF, θ, Hz측정 
- Energy: KWh, KVARh, KVAh 측정
- Phase sequency 표시기능
- 백라이트 기능
- 수동 데이터 저장 및 읽기 기능(99 sets)
- 자동 Data Logging(512KB Memory, 12,000 sets 
per block, total 20,000 sets)
- Points, Start/Stop 시간이 설정 가능한 Trigger
- RS-232 Optical Interface
- 버튼을 사용한 손쉬운 작동
- 가볍고 휴대가 용이한 디자인 

<img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/ETC/blank.jpg\" border=\"0\">
<img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/TES/TES-3600.jpg\" border=\"0\">
<img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/ETC/copyright.jpg\" border=\"0\">
<img src=\"http://daesungwt.speedgabia.com/페이지작업/완료/ETC/company_introduction.jpg\" border=\"0\"> ■ 모델 : MV1004/ MV1006/ MV1008/ MV1012/ MV1024
■ 레코더타입 : Paperless
■ 채널수 : 4/6/8/12/24 ch
■ 표시 : 5.5inch TFT color LCD
■ 최대 측정주기 : 25 ms or 125ms
■ 측정입력 종류 : DCV, TC, RTD, DI
■ 내부 메모리 : 80MB (standard), 200MB (large)
■ 외부 미디어 : CF card of USB memory
■ 표준통신 인터페이스 :  이더넷
1000A AC, AC/DC Clamp Meters DT-3360 시리즈 LCR메타 DT-9935 전력분석계 TES-3600 레코더 MV1000
■ Model : WT210/WT230
■ 전류 : AC/DC 20A
■ 전압 : AC/DC 600V
■ 결선방식 : WT210(단상 전용) WT230(단상~3상4선)
■ 주파수대 : 100KHz
■ 전력정확도 : 0.1%
■ 입력채널수 : WT210 : 1 / WT230 : 2 ~ 3
- 0.1μ H to 200H inductance 측정
- 0.1pF to 20,000μF Capacitance 측정
- 1mΩ to 20MΩ Resistance 측정
- Dissipation Factor 측정
- Zero adjustment
- 빠른 반응 속도
- 옵션 악세사리: SMD(Surface Mount Device) Testing Probe 
* 3¾ digit, 4000 count
* 고속 바 그래프
* 풀 레인지 보호회로
* 자동전원 잠금기능(30분)
* 대용량 클램프(55㎜)
* 자동 레인지
* 주파수 측정기능
* 레인지 홀드
* 데이터 홀드
전력분석계 WT210/WT230 LCR 메터 DT-9930 LCR 메타 MIC-4070D AC/DC CLAMP METER TK-2000AD
* 소형 경량
* 3¾ digit, 3400 count
* 풀 레인지 보호회로
* 자동전원 잠금기능(10분)
* 대용량 클램프(36㎜)
* 자동 레인지
* 데이터 홀드
* 영점조정
>CT내경 40mm의 범용의 고정도 누설전류계
> 0.01mA ~ 300A의 폭넓은 계측
> 외부자계의 영향을 거의 받지않는 고정밀의 누설전류계
> AUTO POWER OFF 기능
> 소형 AC/DC 전류, 전압 측정기
> AC/DC 0.01A 분해능 300A 까지 측정 가능
> 원터치 ZERO 조정
■ 최대 2000A측정 가능, 20/200A(3284)와 200/2000A(3285)의 2종류
  
■ 전·반파정류 파형의 실효값측정을 할 수 있는 AC+DC모드

■ 기기 시동시의 돌입 전류 측정을 할 수 있다, 파고치 피크 hold 기능
AC/DC CLAMP METER 601AD 누설전류계 CL-140 AC/DC CLAMP METER 2033 AC/DC CLAMP METER 3284/3285
■ 얇아서 가벼운 포켓 사이즈

■ 좌우 독립 개폐할 수 있는 양레바·쌍바라지 구조

■ 3280-10는 42A레인지 추가의 3레인지 구성&1m의 낙하에 견디는 구조
■ 참 실효치 정류 방식

■ 오토 파워 오프 기능, 논 휴즈로 AC600 V까지의 회로 보호

■ 파형의 파고치 측정 

* 소형 경량
* 3¾ digi, 3400 count
* 풀 레인지 보호회로
* 자동전원 잠금기능(10분)
* 대용량 클램프(36㎜)
* 자동 레인지
* 데이터 홀드
>DC 2500A, ACA 2100A 
>클램프 사이즈 Φ55mm 

>Bus Bar 65mm(D) x 24mm(W) 

>True RMS (PROVA 2000) 

>DCA One Touch Zero 

>Auto Range A,V, Ω, Hz 

>Analog Output
AC CLAMP METER 3280 AC/DC CLAMP METER 3281/3282 AC CLAMP METER TK-600A AC/DC CLAMP METER PROVA-2000/2003
[이전 10개] [1][2][3] [다음 10개]
서울특별시 구로구 경인로53길 15 업무A동 302호(구로동,중앙유통단지)  /  TEL : 02-6679-2606  /  FAX : 02-6679-2608
사업자등록번호 : 113-86-54863  /  대표자 : 김태준  /  EMAIL : daesungwt@naver.com
Copyright @ 2011 DAESUNGWT.CO.KR all rights reserved.